Table of Contents
Advertisement
5
2.2 5.25" Device Installation
2
1
Remove the 5.25" drive bay cover as shown.
Remove the 5.25" drive bay
metal cover.
Put 5.25" device into the drive bay till the locked-position.
How to remove 5.25" device
1
Pull the right-hand side
2
of the lever to remove
the 5.25" device.
How to put back the 5.25" drive bay cover
Install the 5.25" drive bay cover as shown.
Notice:
It is possible to secure the 5.25" device by
screws if not feel stable enough.
2
1
VH8000 Series
2.3 3.5" Device Installation
Unlock the tool-free clip.
Remove the 3.5" plastic cover.
Insert the 3.5" drive into the front of chassis.
Secure the 3.5" device as shown.
2.4 HDD Installation
Remove the HDD tray by pressing the handle and pull the tray out.
Place HDD on the tray.
Secure HDD using the clips onto the HDD tray for both side.
Beyond the past, Exceed the present, Surpass the competition
6
Advertisement
Table of Contents
