Table of Contents
Advertisement
29
Connector the Quickconn connector
4.6 12cm Radiator & Main Unit
12cm Radiator
Pre-built 12cm radiator
Connect the 4-pin connector
of 12cm fan to power supply.
Main Unit
Connect the 4-pin connector
Pre-built main unit in
5.25 drive bay.
of pump to power supply.
Out
Connect the
Quickconn connector.
Connect the yellow wire(RPM signal)
to the motherboard's fan connector.
VH8000 Series
4.7 Fill Coolant
In
Open the top sliding hood of the chassis,
and remove the accessory storage.
Fill the tank up
with coolant.
Turn on the PC power switch.
Liquid level will decrease when
you power on the system,
please keep filling coolant until
the tank is filled up.
Please make sure liquid is
flowing continuously and
smoothly within the tube.
Close the cover
cap
of liquid tank.
Beyond the past, Exceed the present, Surpass the competition
30
Advertisement
Table of Contents
