Install Water Tube - Thermaltake Armor+ MX LCS VH8000 Series Manual

27

4.5 Install Water tube

CPU Waterblock
Out
Radiator
A
B
C
Step
A Connect Main Unit to Waterblock
Insert the hose clip(N) through the tube.
First determine the length required for
tubing from waterblock to the main
unit. Then cut the tubing accordingly.
Pump and Liquid Tank
In
Before installing water tube, please
install motherboard to the case first.
Then remove black rubber caps from
the waterblock.
Connect the tube with
the waterblock.
Use pliers to tighten the hose clip(N).
Insert the hose clip and
female quickconn connector
through the tube. Use pliers
to tighten the hose clip(N).
VH8000 Series
Step
B Connect Waterblock to Radiator
Step
C Connect Radiator to Main Unit
First determine the length required for
tubing from radiator to the main
unit. Then cut the tubing accordingly.
Beyond the past, Exceed the present, Surpass the competition
Insert the hose clip(N) through a tube.
Connect the tube with the waterblock.
Use pliers to tighten the hose clip(N).
Insert the hose clip(N) through the tube.
Connect the tube with the radiator from
waterblock. Use pliers to tighten
the hose clip(N).
Insert the hose clip(N) through a tube.
Connect the tube with the radiator.
Use pliers to tighten the hose clip(N).
Insert the hose clip and
female quickconn connector
through the tube. Use pliers
to tighten the hose clip(N).
28