Video Setting; Channel Search - Denver MT-980T2H User Manual

First Time Installation
Sort
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
LCN (Logical channel number)
Set LCN on or off.

Video Setting

To access the Menu, press SETUP
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting.
Press EXIT to exit the menu.
HDMI Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,
4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to get the maximum
display when watching TV.
then select [Picture]. The Menu
HDMI Resolution
If the video does not appear correctly, change the setting. This
setting is to match the most common setting for HDMI.
[480i] for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the
settings. This should match the most common setting for TVs in
your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.

Channel Search

To access the menu,press SETUP
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
ENG-7
and select [Search Channel].