Buffalo AirStation WLA-L11G User Manual page 21

Windows 2000/NT 4.0
The AirStation is set in the settings personal computer using the following procedure.
1
Click the Start button, and select Programs, MELCO AirStation, and then
AirStation Manager.
2
3
4
5
6
Select Edit, and Search AirStation.
Windows will search for the AirStation.
Select the AirStation once it has been found
and then select Admin, and Set IP Address.
The IP address settings is set and click the OK
button.
• Change the IP address and net mask
depending on the environment.
• Consult your network manager for the IP
address settings.
• When making the initial IP address set-
tings, leave the Password field blank.
For IP address settings, refer
to "Allocating IP Addresses" (page 52) in
Chapter 3 Troubleshooting.
The AirStation IP address will be changed.
WLA-L11 User's Manual 19