Table of Contents
Advertisement
9
After connecting to the AirStation, a slow baud rate of 2 Mbps or similar may be displayed.
When communications actually begin, the correct baud rate will be displayed.
Continue to "Checking AirStation Connection" (page 26).
Checking AirStation Connection
Use the client manager to check the connection between the AirStation and the wireless LAN personal com-
puter.
1
From the wireless LAN personal computer, click the Start button, and select
Programs, MELCO Wireless LAN, and then select Client Manager.
2
3
4
26
WLA-L11 User's Manual
Connection to the AirStation is completed.
When connecting to AirStation is
completed, the application name in the
AirStation display will change from gray to
black, and an antenna mark (
be displayed. If the AirStation application
is not displayed in black, refer to "Cannot
Connect to the AirStation Using Client
Manager
(Unavailable
Found)" (page 52) in Chapter 3 Trouble-
shooting.
Select File, Test Connection, and Diagnostic.
Perform the connection test only
for the AirStation applications with the
antenna mark (
).
Check the connection status.
The connection test results will be displayed.
) will also
Even
When
Advertisement
Table of Contents
