Samsung ML-2250/XBG Service Manual page 55

Disassembly and Reassembly
5.16 MP Ass'y and Feed Roller
1. Before you remove the Feed Ass'y, you should
remove:
- Front Cover
- Rear Cover
- Middle Cover
- Side Cover(LH, RH)
- Top Cover
2. Disconnect the MP Solenoid and MP Sensor
harness from the main PBA. Remove the four
screws from the MP Ass'y Front and take it out
taking care to thread the cables through the
frame.
3. Remove the four screws from the MP Ass'y and
take it out.
MP Ass y
Service Manual
5-16
4. Remove the two screws from the Guide Paper
Spring.
Feed Bracket
5. Remove the three screw from the Feed Bracket
and take it out.
Feed Gear2
6. Remove the Feed Gear2, as shown below.
Feed Gear2
Samsung Electronics