Samsung ML-2250/XBG Service Manual page 54

5.15 Transfer Ass'y
1. Before you remove the Transfer Ass'y, you
should remove:
- Front Cover
- Rear Cover
- Middle Cover
- Side Cover(LH, RH)
- Top Cover
2. Remove three screws and take the Transfer
Earth out.
Transfer Earth
3. Unplug the PTL Holder connector then remove
the PTL Holder and PTL Lens, as shown below.
PTL Holder, PTL Lens
Samsung Electronics
Disassembly and Reassembly
4. Unlatch the Transfer Roller as shown below and
remove it.
Transfer Roller
5. Unlatch the two transfer roller vushes and
remove them as shown below.
Transfer Roller
Bush
Spring
Bush-Spring
Service Manual
5-15