Samsung ML-2250/XBG Service Manual page 47

Disassembly and Reassembly
5.9 Engine Shield Ass'y & Exit Board
1. Before you remove the Engine Shield Ass'y, you
should remove:
- Front Cover
- Rear Cover
- Side Cover(LH, RH)
- Top Cover
2. Release 1 screw and remove the SMPS shield
Engine Shield Ass'y
SMPS Shield
3. Remove the twelve screws securing from the
Engine Shield Ass'y and unplug the all connectors.
Then take the Engine Shield Ass'y.
Engine Shield Ass'y
Service Manual
5-8
4. Remove the two screws and remove the Exit
Board.
Exit Board
Samsung Electronics