Making N In 1 Copies Or A Poster - Brother DCP-115C User Manual

Making N in 1 copies or a poster (Page Layout)
You can reduce the number of pages for copies by using the N in 1
copy feature. This allows you to copy two or four pages onto one
page, allowing you to save paper. It is also possible to create a
poster. When you use the Poster feature your machine divides your
document into sections, then enlarges the sections so you can
assemble them into a poster. If you want to make a poster, use the
scanner glass.
■
Please make sure Paper Size is set to A4 or Letter.
■
You can use the N in 1 copy feature with 100% copy size
only.
■
(P) means Portrait and (L) means Landscape.
■
ADF is not available for DCP-115C, DCP-117C and
DCP-315CN.
1
Load your document.
2
Copy Options
Press
Set
Press .
3
Press or
4 in 1 (P), 4 in 1 (L)or Poster(3 x 3).
Set
Press .
4
Mono Start
Press
You can also press
or if you are using a DCP-315CN.
5
If you are making a poster or placed the document in the ADF,
the machine scans the page and starts printing.
If you are using the scanner glass:
6
After the machine scans the page,
the LCD shows:
Press to scan the next page.
7
Put the next document on the
scanner glass.
Set
Press .
8
Repeat Steps 6 and 7 for each page of the layout.
9
After all the pages of the document have been scanned,
press to end.
2 - 9 MAKING COPIES
and or
to select 2 in 1 (P), 2 in 1 (L),
to scan the document.
Colour Start
to select Page Layout.
if you are using Poster layout
Next Page?
▲
Yes
Set Next Page
Then Press Set
▼
No