Biostar P4TPT User Manual
Biostar P4TPT User Manual

Biostar P4TPT User Manual

Biostar p4tpt motherboard: user guide
Hide thumbs Also See for P4TPT:

Advertisement

Quick Links

P
4
T
P
T
P
4
T
P
T
P
4
T
P
T
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we
will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P4TPT and is the answer not in the manual?

Questions and answers

Summary of Contents for Biostar P4TPT

  • Page 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    ENGLISH... 1 P4TPT Features ... 1 Package contents ... 2 Layout of P4TPT ... 2 CPU Installation ... 3 DDR DIMM Modules: DDR1-2 ... 4 Jumpers, Headers, Connectors & Slots ... 5 ESPAÑOL ... 10 Características del P4TPT ... 10 Contenido del Paquete...
  • Page 3: English

    English P4TPT Features Use Intel 845PE/ ICH4 Chipset, ITE IT8712. Contains on board I/O facilities, which include two serial ports, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a game port . ®...
  • Page 4: Package Contents

    Mic-in phone-jack share with Bass and Center. Support front audio pin head functions. Package contents HDD Cable X 1, FDD Cable X 1, Fully Setup Driver CD X 1 USB Cable X 2 (Optional) Layout of P4TPT JKBMS1 JKBV1 & Mouse...
  • Page 5: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU.
  • Page 6: Ddr Dimm Modules: Ddr1-2

    DDR DIMM Modules: DDR1-2 Supports DDR200/266/333 unregistered 184-pin non-ECC DDR SDRAM DIMMs. Does not support double-size x16 DDR DIMMs. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket DDR Module Location DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB * The list shown above for DRAM configuration is only for reference.
  • Page 7: Jumpers, Headers, Connectors & Slots

    3D graphics. Peripheral Component Interconnect Slots: PCI1-5 This motherboard is equipped with 5 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards, which has, supplanted the older ISA bus standard in...
  • Page 8 Power Connectors: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Power Conn.) (ATX Main Power Conn.) (ATX Main Power Conn.) Wake On LAN Header: JWOL1 Ground 5V_SB Wake up WOL1 Front USB Header: JUSB2/ JUSB3 Pin1,2 ==> +5V Pin3,4 ==> Data(-) Pin5,6 ==> Data(+) Pin7,8 ==>...
  • Page 9 5V/ 5VSB Selection for USB: JUSBV1/2_3 Pin 1-2 on ==> 5V Pin 2-3 on ==> 5V_SB JUSBV1/2_3 5V/ 5VSB Selection for KB: JKBV1 Pin 1-2 on ==> 5V Pin 2-3 on ==> 5V_SB JKBV1 Audio Subsystem: JAUDIO1/ JCDIN1 JAUDIO1 JAUDIO1 (Front Audio Header) (Front Audio Header) (CD-ROM Audio-In Header)
  • Page 10 Clear CMOS Jumper: JCMOS1 Pin 1-2 on ==> Normal Operation Pin 2-3 on ==> Clear CMOS Data JCMOS1 Front Panel Connector: JPANEL1 PWR_LED (+) (-) HLED ==> Speaker Conn. HLED ==> Hard Driver LED ==> Reset Button ==> Infrared Conn. ==>...
  • Page 11: Back Panel Connectors

    Back Panel Connectors JKBMS1 JPRNT1 PS/2 Mouse Parallel JUSB1 PS/2 COM1 COM1 COM1 Keyboard JCOM1 4 Ch an nel Speakers Speaker Out Line In/ Speaker Out Mic In Rear Speaker JGAME1 Game Port Speaker Line In Mic COM2 JCOM2 6 Ch an n el Speakers Line In/ Mic In/ Center &...
  • Page 12: Español

    Español Características del P4TPT Usa Chipset Intel 845PE/ ICH4, ITE IT8712. Contiene facilidades I/O integrados en la placa madre en el que incluye dos puertos en serie, un puerto paralelo, un puerto para ratón PS/2, un puerto para teclado PS/2, puertos de audio, puertos USB y un puerto de juego .
  • Page 13: Contenido Del Paquete

    Bass y Center. Soporta funciones del cabezal de audio frontal. Contenido del Paquete Cable HDD X 1, Cable FDD X 1, Configuración Completa del Driver CD X Cable USB X 2 (Opcional) Disposición del P4TPT JKBMS1 JKBV1 Teclado &...
  • Page 14: Instalación De La Cpu

    Instalación de la CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU.
  • Page 15: Módulos Ddr Dimm: Ddr1-2

    Módulos DDR DIMM: DDR1-2 Soporta DDR 200/266/333 unregistered 184-pin non-ECC DDR SDRAM DIMMs. No soporta DDR DIMMs x16 de doble cara. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulos DIMM (184 contactos) Localización Módulo DDR del Zócalo DIMM DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB...
  • Page 16: Puentes, Cabezales, Conectores Y Ranuras

    Puentes, Cabezales, Conectores y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA / 33/ 66/ 100. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Page 17 Conectores de Corriente: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Conector de Corriente) (ATX Conector de Corriente Principal) Cabezal Wake On LAN: JWOL1 Tierra 5V_SB Wake up WOL1 Cabezal Frontal USB: JUSB2/ JUSB3 Contacto1,2 ==> +5V Contacto3,4 ==> Dato(-) Contacto5,6 ==> Dato(+) Contacto7,8 ==>...
  • Page 18 5V/ 5VSB Selección para USB: JUSBV1/2_3 Contacto 1-2 on ==> 5V Contacto 2-3 on ==> 5V_SB JUSBV1/2_3 5V/ 5VSB Selección para KB: JKBV1 Contacto 1-2 on ==> 5V Contacto 2-3 on ==> 5V_SB JKBV1 Subsistema de Audio: JAUDIO1/ JCDIN1 JAUDIO1 JAUDIO1 (Cabezal de Audio Frontal) (Front Audio Header)
  • Page 19 Conector del Panel Frontal: JPANEL1 PWR_LED (+) (-) HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> Boton de Encendido Puente de Borrar CMOS: JCMOS1 Contacto 1-2 on ==>...
  • Page 20 Conectores del Panel Trasero JKBMS1 JPRNT1 Raton PS/2 Paralelo JUSB1 Teclado COM1 PS/2 JCOM1 Altavoz de 4 Canales Salida del Altavoz Entrada de Entrada Salida del Linea/ del Mic Altavoz Rear Speaker JGAME1 Puerto de Juego Salida del Entrada Entrada COM2 Altavoz de Linea...
  • Page 21: Warpspeeder

    WarpSpeeder Introduction [ WarpSpeeder™ ], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
  • Page 22: System Requirement

    System Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.) Installation Execute the setup execution file, and then the following dialog will pop up.
  • Page 23 When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [ WarpSpeeder™ ] utility will be automatically and immediately launched after you click “Finish”...
  • Page 24: Usage

    Usage The following figures are just only for reference, the screen printed in this usr manual will change according to your motherboard on hand. [ WarpSpeeder™ ] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.
  • Page 25 2. Main Panel If you click the tray icon, [ WarpSpeeder™ ] utility will be invoked. Please refer do the following figure; the utility’s first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information.
  • Page 26 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not.
  • Page 27 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains the these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment.
  • Page 28 “Verify button”: User can click this button and [ WarpSpeeder™ ] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [ WarpSpeeder™ ] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting.
  • Page 29 5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second.
  • Page 31 Note: Because the overclock, overvoltage, and hardware monitor features controlled several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions. This property can make [ WarpSpeeder™...
  • Page 32: Trouble Shooting

    Trouble Shooting PROBABLE No power to the system at all Power light don’t illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on PROBABLE System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is spinning.
  • Page 33: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE No hay corriente en el sistema. La luz de corriente no ilumina, ventilador dentro de la fuente de alimentación apagada. Indicador de luz del teclado apagado. CAUSA PROBABLE Sistema inoperativo. Luz del teclado encendido, luz de indicador de corriente iluminado, disco rígido está...
  • Page 34 09/27/2002...

This manual is also suitable for:

P4tpt800

Table of Contents