Scale Mode - Tanita DC-430U Instruction Manual

Scale Mode

The " " icon is displayed when the scale mode is selected.
1
Enter the ID number
If the ID number function is set to OFF, the scale starts
measuring weight immediately.
If the ID number is set to ON, ID number will be increased
automatically.
To change ID number manually, press
preferred ID number.
The ID number range is from 0 to 9999999999999999.
Press to enter tare value (clothes weight).
The tare value range is 0.0-20.0lb (0.0 - 10.0kg).
Note
2
Measure body weight
Wait until "
" " is displayed when you have entered a tare value
(clothes weight).
The "Stabilized" icon (
The "Stabilized" icon (
When the load is stable, the measurement results are output via the USB port
and stored on an SD card.
ID number setting → See P.13 setting 7
" flashes.
) appears when the load is stable.
) disappears when the load is unstable.
and enter the
19 19