Rear Panel Connectors - Speco D8HS2TB User Manual

3-2. Rear Panel Connectors

 Do not power this system on before all the connections are attached.
 Make sure all the connections are properly secured. Faulty connection may result in
① Ground: Use for ground port.
② VIDEO IN: Video input port.(For Analog 960H cameras)
③ VIDEO OUT: MAIN – Composite Video Output / SPOT – Spot Monitor
④ AUDIO IN & OUT: Four connectors for audio input and one connector for audio output.
⑤ HDMI: HDMI output port. Connectors to the HDMI Monitor
⑥ VGA: VGA (Video Graphics Array) output port. Connects to the PC VGA monitor.
⑦ E-SATA: External SATA port for extension storage.
⑧ AUDIO IN: Audio inputs connections for channels 5-8 or 5-16 through external cable
⑨ USB: USB terminal for video export or firmware upgrade
⑩ IP CAM:
Network Second Terminal. No Internet access.
⑪ ETHERNET: RJ-45 Connector for LAN Connection, used for Internet Connection
⑫ SENSOR IN, ALARM OUT, RS-485: External sensor terminal, External alarm out terminal & RS-485
for PTZ Camera control
⑬ POWER: DC12V input
the system being damaged.
Figure 3.2.1. Connectors
D16HS
D8HS
22