Spot Out - Speco D8HS2TB User Manual

4-4-3. Spot Out

Item
SPOT ON EVENT
SPOT EVENT
DWELL TIME
SEQUENCE
SEQUENCE
DWELL TIME
SPOT CHANNEL
Figure 4.4.2.3. Controller Selection Screen
Figure 4.4.3. SPOT-OUT Setup Screen
Table 4.4.3. Menu Item in SPOT-OUT Setup Screen
Enable/disable channel change if an event occurs on a channel.
Set the dwell time for the display of the event activated channel.
(3-10sec)
Enable/disable sequential display of spot channel in full screen.
If select ON, the selected channel will be displayed on the monitor
periodically.
Set the dwell time for the spot channel display. (3-10sec)
Select a channel for spot monitoring using the mouse or the remote
control and press OK button.
Description
40