Biostar M7VIK User Manual page 30

Biostar m7vik motherboard: user guide

Hide thumbs Also See for M7VIK:

Table of Contents

"Verify button": User can click this button and [ WarpSpeeder™ ] will

proceed a testing for current frequency. If the testing is ok, then the

current frequency will be saved into system registry. If the testing fail,

system will do a fail-safe rebooting. After reboot, the [ WarpSpeeder™ ]

utility will restore to the hardware default setting or load the verified best

and stable frequency according to the Recovery Dialog's setting.

Note: Because the testing programs, invoked in Auto-overclock and

Verify, include DirectDraw, Direct3D and DirectShow tests, the

DirectX 8.1 or newer runtime library is required. And please make

sure your display card's color depth is High color (16 bit) or True

color( 24/32 bit ) that is required for Direct3D rendering.

Table of Contents