Biostar M7VIK User Manual page 29

4. Overclock Panel
Click the Overclock button in Main Panel, the button will be highlighted and the
Overclock Panel will slide out to left as the following figure.
Overclock Panel contains the these features:
a. "–3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button":
provide user the ability to do real-time overclock adjustment.
Warning: Manually overclock is potentially dangerous, especially
when the overclocking percentage is over 110 %. We strongly
recommend you verify every speed you overclock by click the Verify
button. Or, you can just click Auto overclock button and let
[ WarpSpeeder™ ] automatically gets the best result for you.
b. "Recovery Dialog button": Pop up the following dialog. Let user select a
restoring way if system need to do a fail-safe reboot.
c. "Auto-overclock
[ WarpSpeeder™ ] will set the best and stable performance
frequency automatically. [ WarpSpeeder™ ] utility will execute a series of
testing until system fail. Then system will do fail-safe reboot by using
Watchdog function. After reboot, the [ WarpSpeeder™ ] utility will restore
to the hardware default setting or load the verified best and stable
frequency according to the Recovery Dialog's setting.
button": User can click
27
this button and
and