English; M7Vik Features - Biostar M7VIK User Manual

Biostar m7vik motherboard: user guide
Hide thumbs Also See for M7VIK:
Table of Contents

Advertisement

English

M7VIK Features

Use VIA KT400 / VT8235 Chipset, Winbond W83697HF.
Contains on board I/O facilities, which include two serial ports, a parallel
port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a
game port.
Supports Single Socket-A for an AMD Athlon/ Duron Family processor,
running at 200/266/333 MHz Front Side Bus frequency.
The AMD Athlon/ Duron system bus supports the 200/266/333 MHz
high-speed, split-transaction AMD Athlon/ Duron system bus interface.
Supports Ultra DMA 33/66/100/133 Bus Master Modes, PIO Mode 4,
Master Mode, and high performance hard disk drives.
Supports USB2.0 High Speed Device.
The KT400 system controller is designed to support 200/266/333/400 MHz
DDR SDRAM DIMMs.
Supports one CNR Slot (Type B only), one AGP 8X Slot, and five 32-bit
PCI Bus slots.
Complies with PC ATX form factor specifications.
Supports popular operating systems such as Windows NT, Windows 98SE,
Windows 2000, Windows ME, Windows XP and LINUX.
DIMM Power Selection by BIOS setup to adjust DDR DIMM voltage. (If you
meet the DDR DIMM compatible program, try to adjust the DDR Voltage to
fix the compatible program.) (Optional)
CPU over temperature protection.
Intel® AC'97 2.2 compatible. High S/N ratio meets PC 99 requirements.
Line-in phonejack and Mic-in jack share with rear Audio out for 6 channels
Audio.
6-Channel Hardware Audio. (Change Line-In to Back-Audio Out and Mic-In
to Bass/ Center Out by Audio Utility.) (Optional)
1

Advertisement

Table of Contents
loading

Table of Contents