EEG 491 Series Manual page 33

Display Output Queue
31
To set the message output queue for a Channel, first enter the Begin Set
Output Queue command. T1 is the default channel. A prompt reading ">"
should appear. Enter the desired Messages, delineated by carriage returns,
in the desired order of insertion. When the list is completed, enter the End
Set Output Queue command. A message that is associated with a different
channel cannot be added to the queue.
<CTRL+A>B <ENTER>
Displays the contents of both text channel output queues.
Copyright © 2000-2014 EEG Enterprises, Inc.
All Rights Reserved.
HD491 Smart Encoder