EEG 491 Series Manual page 30

HD491 Smart Encoder
Delete XDS Packet
Delete XDS Queue
Block Upstream XDS
End Blocking
 Priority displays the packet's Priority rating. Packets with smaller
numerical priorities go out more frequently than packets with larger
numerical priorities, with an approximately inverse proportional
relationship between numerical Priority and insertion frequency.
 Frames displays the number of frames the packet occupies. Larger
packets take up more frames and more bandwidth.
 Source indicates whether the packet is locally inserted (Loc) or
upstream regenerated (Up).
A report on an individual packet includes the packet's hex byte
representation, decoded content for common packets, and checksum in
addition to the above information.
<CTRL+A>P Packet <ENTER>
Deletes the packet of the specified Class and Type from the XDS queue.
If the packet is a Program Name or Program ID packet, all other program-
specific packets will also be deleted, and the Encoder will insert a Clear
packet for downstream databases and decoders.
<CTRL+A>L -all <ENTER>
Deletes all packets in the XDS queue. Packets loaded from NVM will
be removed from the queue but will remain in NVM storage.
<CTRL+A>T -Class00 <ENTER>
<CTRL+A>T Class00 <ENTER>
Blocks all incoming packets of the specified Class. Entering all instead
of Class00 as the parameter will cause all upstream packets to be blocked.
Omitting the Class parameter will cause the block/pass status for each
Class to be reported.
Example: <CTRL+A>T –0100 <ENTER> blocks all upstream XDS
packets in the Current Program Class. <CTRL+A>T 0100 <ENTER>
will resume normal XDS operation.
Copyright © 2000-2014 EEG Enterprises, Inc.
All Rights Reserved.
28