Connection To External Laud Speakers - BenQ PDP46W1 User Manual

7.4

Connection to External Laud Speakers:

Speaker (Optional)
Speaker Wire
Speaker Terminal
Press the terminal of one speaker down to its end position, extend the wire of the
speaker (remove the insulator at the front side) into the bottom of the terminal,
and restore the terminal to its original position.
Pull the wire gently to make sure that the wire is fastened firmly.
Note 1: The wiring of the left and right speakers is the same.
Note 2: When connecting to external speakers, set the speaker to External mode in the
"Audio" page of the "OSD Menu". (Refer to 8.7.2.)
Note 3:Please use the special speaker line enclosed this speaker , otherwise we can not
assure you that our product can fit the standard of electro magnetic
interference.
PDP Rear View
Speaker Wire
23