Table of Contents
Advertisement
6.2
Front View:
(1) Remote control window: The window with a power indicator and IR receiving sensor
are used for indicating power status and receiving remote control signals.
The indicator shows whether the power of the Display is turned on.
Indicator ON (red)
Indicator ON (green)
Indicator flashing (red/green)
(2) Button: The functions of the buttons are described as follows:
INPUT：Select appropriate signal source directly. (Depending on the module, the
available signal source options may be different)
A. PC Module: RGB 1→RGB 2 (circular display).
B. PC Module + Video Module:
RGB 1→RGB 2→AV1→S-Video→Y Cb/Pb Cr/Pr (circular display).
C. PC Module + Enhanced PC Module:
RGB 1→RGB 2→RGB 3→RGB 4 (circular display).
Note: When pressing this button to display "OSD Menu", the signal sources can be
selected by using the ▲/▼ buttons.
MENU: Enter "OSD Menu" and select "OSD Menu" page, which shows in the
following sequence: Display→Image (for PC input) or AV system (for Video
input)→Audio→Language and Screen Saver→Misc.→Status (circular display).
Standby state.
Power ON state.
alternately: Power Saving state
12
Advertisement
Table of Contents
