Table of Contents
Advertisement
The picture will become dark or the color will fade after the lamp
has been used for a long time. In such cases, continued use of the
lamp could cause a malfunction. Replace the lamp with a new one.
A Lamp/temperature Status LED Indicator
1. Lamp in excess of service hours
When the LED light is a continuous red, it means the lamp has
exceeded (*1500) service hours. After this light appears, it is
advisable to replace the projection lamp as soon as possible.
"CHANGE THE LAMP, AND RESET THE LAMP TIMER" will be displayed on
i.
the screen if the lamp has been operated for 1200 hours (see
figure 16).
"CHANGE THE LAMP, THE POWER WILL TURN OFF AFTER 20 HOURS" will
ii.
be displayed on the screen if the lamp has been operated for
1479 hours. The "20" will count down (see figure 17).
"CHANGE THE LAMP!" will blink on the screen together with a red
iii.
LED if the lamp has been operated for more than (*1500) hours
(see figure 18). The power will turn off automatically after 10
minutes. All three of the above messages will not display for
more than 3 minutes, but each message will be displayed whenever
you turn on the lamp.
Figure 16 Lamp replacement warning signal
English 13
Advertisement
Table of Contents
