Table of Contents
Advertisement
Figure 13 Range
Usage and Replacement of Lamp
The light source lamp has a limited service life.
The picture will become dark or the color will fade after the lamp
has been used for a long time. In such cases, continued use of the
lamp could cause a malfunction. Replace the lamp with a new one.
A Lamp/temperature Status LED Indicator
1. Lamp in excess of service hours
When the LED light is a continuous red, it means the lamp has
exceeded (*1500) service hours. After this light appears, it is
advisable to replace the projection lamp as soon as possible.
Figure
14
Lamp
warning signal I
Figure
15
Lamp
warning signal II
Figure
16
Lamp
warning signal III
English 12
"CHANGE
TIMER" will be displayed on the screen if
the
hours.
replacement
"CHANGE THE LAMP, THE POWER WILL TURN OFF
AFTER 20 HOURS" will be displayed on the
screen if the lamp has been operated for
1479 hours. The "20" will count down.
replacement
"CHANGE
screen together with a red LED if the
lamp
(*1500) hours (see figure 18). The power
will
replacement
minutes. All three of the above messages
will not display for more than 3 minutes,
but
whenever you turn on the lamp.
THE
LAMP,
lamp
has
been
THE
LAMP!"
has
been
operated
turn
off
automatically
each
message
AND
RESET
THE
operated
for
will
blink
for
more
after
will
be
displayed
LAMP
1200
on
the
than
10
Advertisement
Table of Contents
