Page 2
Serial number: __________________________________ Date of purchase: _______________________________ Place of purchase: ______________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Page 3
Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Page 4
• Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power This product should be operated from the type of power indicated on the • marking label.
Page 5
• the power cord or plug is damaged, cut or frayed liquid was spilled into the product • the product was exposed to rain or water • the product has been dropped or the case has been damaged • the product exhibits a distinct change in performance, indicating a need •...
Page 6
This product is capable of displaying inverted images for ceiling mount • installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed. 360° projection capability Images can be projected over a full 360° range •...
Page 7
For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/Sustainability/sustainability01.htm Do not stare into the beam, RG2 "As with any bright source, do not stare into the direct beam, RG2 IEC 62471-...
viii First things first Usage Notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Cleaning the lens • Before cleaning the lens, be sure to turn off the projector and unplug the power cord to allow the projector to cool down for at least 30 minutes. • Use a compressed air tank to remove the dust. •...
Information for your safety and comfort First things first viii Usage Notes viii Precautions viii Cleaning the lens Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image...
Page 11
Specifications Compatibility modes Regulations and safety notices...
Introduction Product Features ® This product is a single-chip DLP projector. Outstanding features include: ® • technology Native 3840x2160 resolution • Full/4:3/16:9/L.Box/Anamorphic 2.35:1 aspect ratio supported High brightness and contrast ratio • Versatile display modes enable optimum performance in any situation •...
This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Power cord HDMI cable http://go.acer.com/?id=17883 Quick Start Guide Panduan ringkas Ghid de pornire rapidă Stručná příručka Priročnik za hiter začetek...
Projector Overview Projector Outlook Front / upper side Description Description Focus ring Air outlet Control panel Air inlet Power button Lens cap Remote control receiver Tilt adjusting wheels...
Page 15
Right / Rear side 5 6 7 Description Description USB A connector for 5V DC output Power socket (Service) connector USB A for Wireless dongle Audio out connector HDMI 1 connector Kensington™ lock port HDMI 2 connector Security bar USB A connector for keyboard/ mouse and memory stick in Smart source Note 1: Functions vary depending on model definition.
Control Panel Icon Function Description POWER POWER Power Indicator LED LAMP LAMP Light source Indicator LED TEMP TEMP Temp Indicator LED See the contents in "Turning the Projector POWER On/Off" section. INFO INFO Source Information : select OSD items under OSD main menu.
Remote Control Layout Model No: B-1202 MC.JRK11.006 Icon Function Description Infrared Sends signals to the projector. transmitter POWER Refer to the "Turning the Projector On/Off" section. Select/Enter Confirm your selection of items. Four Use up, down, left, right buttons to select items or make directional adjustments to your selection.
Getting Started Connecting the Projector DVD player, Set-top Box, Audio output HDTV receieve Internet HDMI HDMI...
Page 19
Description Description Wireless dongle USB power for HDMI media dongle HDMI cable USB keyboard/ mouse and USB memory stick HDMI media dongle Audio out cable Note 1: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.
Turning the Projector On/Off Turning on the Projector Ensure that the power cord and signal cable are securely connected. The Power indicator LED will solid red. Turn on the projector by pressing "Power" button on the control panel or remote control, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player ,etc.).
Turning the projector off To turn the projector off, press and hold the power button. This message appears: "Please press power button again to complete the shutdown process." Press the power button again. The power indicator LED will turn solid red to indicate standby mode. It is now safe to unplug the power cord.
Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle.
The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • GD711/ D4K2106 series To obtain an image size of 80" set the projector at a distance 2.2 m from the screen.
User Controls Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press " " on the remote control or control panel.
Color Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Standard: For common environment. • Presentation: For meeting presentation • sRGB: standard RGB color space. • Rec. 709: standard Rec. 709 color space. •...
Page 26
3.The ISF calibration will be charged and guaranteed by ISF certified calibrator, and thereby Acer is not responsible for the calibration service. Low Input Lag Use this function to make the projeccted screen smoothly without any lag.
Page 27
Note 1: "Saturation" and "Tint" functions are not supported RGB color space timing. Note 2: Functions vary depending on model definition. Note 3: "*" Hot key "Right->down->Left->up" to open ISF mode.
Image Projection • Front: The factory default setting. • Rear: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection.
Page 29
Keystone Adjusts image distortion caused by tilting projection. Auto keystone Off: Manually adjusts vertical image. On: Automatically adjusts vertical image. H. Keystone Press the button to adjust image distortion horizontally and makes a squarer image. V. Keystone Press the button to adjust image distortion vertically and makes a squarer image.
Page 30
Choose "On" to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards with corresponding SW player. • Off: Turn off 3D mode. 3D L/R Invert If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert"...
Display the projector information for Model Name, Input Source, Signal Type, Display Mode, Serial No., Software Version and QR code on the screen. Scan QR code linking to Acer projector portal via mobile. Reset Press the "ENTER" button and choose "Yes" to return the parameters on all menus to the factory default settings.
Management ECO Mode Choose "On" to dim the projector lamp which will lower power consumption and reduce noise. Choose "Off" to return normal mode. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector.
Audio Volume • Press to decrease the volume. • Press to increase the volume. • Mute Choose "On" to mute the volume. • Choose "Off" to restore the volume. Note: Functions vary depending on model definition.
Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Connected as described in the "Getting Started"...
Page 35
Partial, scrolling • For an incorrectly displayed image: or incorrectly • Follow the steps for item 2 (above) to adjust displayed image the resolution of your computer. (For notebooks) • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5] •...
Page 36
Image is too small • Adjust the zoom ring on the projector. or too large • Move the projector closer to or further from the screen. • Press "MENU" on the remote control. Go to "Image - -> Aspect Ratio" and try different settings or press "RATIO"...
Page 37
OSD Messages Condition Message Reminder Message • Fan Fail - the system fan is not working. • Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please check the following message.
LED & Alarm Definition Listing LED Messages Lamp_LED Temp_LED Power LED Message Blue Input power plug Flash ON to Flash ON to Flash ON to OFF 100ms OFF 100ms OFF 100ms Standby Power button ON Power off (Cooling state) Quick Flashing Power button OFF (cooling completed;...
Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structural ceiling member, and secure the ceiling mount base to the ceiling. Choose the length combination based on actual environment. (CM-01S doesn’t include Type 2 and Type 3.) Type 1 Type 2...
Page 40
Type 1: For the standard size use three bracket screws to mount the projector to the ceiling mount bracket. Type 2 and Type 3: Alternatively, for the larger size, use the sliding extensions for more supports. Type 1: Type 2: Type 3: Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat...
Page 41
Adjust the angle and positioning as necessary. 360° Screw Type A Washer Type Diameter (mm) Length (mm) Large...
Page 42
Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system ® 4K UHD Resolution Native 3840x2160 resolution • Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050), 1080p(1920x1080), WUXGA-RB (1920...
Page 43
3.5 mm audio jack output USB type-A(Service) USB type-A for HID keyboard mouse and memory stick USB type-A for Wi-Fi dongle Note 1: Design and specifications are subject to change without notice. Note 2: 1920x1080@240 is only for High Frame Rate. Note 3: The V.Frequency range of Variable Refresh Rate is 24~144...
Page 47
Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 48
Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Compliant with Russian/ Ukraine regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
Page 49
Model Number: GD711 / D4K2106 We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations: Directive 2014/53/EU on Radio Equipment, RoHS Directive 2011/65/EU and ErP Directive 2009/125/EC.The following harmonized standards and/or other relevant...
Page 50
The following local Manufacturer / Importer is responsible for this declaration: Product: DLP Projector Machine Type: GD711 / D4K2106 Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. Suite 1500 San Jose, CA 95110 U.