BenQ FP94VW User Manual page 9

2. Connect the PC video cable.
Do not use both DVI-D cable and D-Sub cable on
the same PC. The only case in which both cables
can be used is if they are connected to two different
PCs with appropriate video systems.
Connect one end of the DVI-D cable to the monitor
DVI-D socket and the other end to the DVI-D port
on your computer. (optional)
The DVI-D format is used for direct digital
connection between source video and digital LCD
monitors or projectors. The digital video signals
produce a superior quality picture than analog
video signals.
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor D-Sub
socket. Connect the other plug of the D-Sub cable
(at the end with the ferrite filter) to the computer
video D-Sub socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket
labelled 'POWER IN' on the rear of the monitor. Do
not connect the other end to an electric outlet just
yet.
Either
Or
How to assemble your monitor hardware 9