BenQ FP94VW User Manual page 14

3. Remove the rear cover.
Slightly pull the rear cover upward away from the
monitor.
After removing the rear cover, you shall see the screw
plate at the rear of the monitor.
4. Follow the instruction manuals of the wall
mount bracket you purchased to complete the
installation.
To attach the rare cover:
1. Tilt the screw cover forward and insert the two tabs
on the front edge into the recesses of the screw plate.
No tools are required.
2. Push the other tabs of the rare cover inward so that
they could snap into the aligned grooves.
There will be clicking sounds as the rare cover is
perfectly attached.
14 How to assemble your monitor hardware