BenQ FP94VW User Manual page 10

4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together
and reinsert the clip over them to retain the cables
neatly in place behind the monitor stand.
5. Attach the accessory hanger. (optional)
Fit the tenon joints of the preferred accessory
hanger to the mortises at the rear side of the moni-
tor.
Press down the hanger to fasten itself into the moni-
tor.
While using either of them, you can make your desk
more organized by putting small accessories, like the
microphone headset, the earphones, the game gear,
etc., on the hanger.
We strongly recommend that you hang
accessories of light weight. The standard
weight capacity of the hanger is up to 0.5kg.
10 How to assemble your monitor hardware