Table of Contents
Advertisement
Power LED
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
Reset button
This button resets or restores the system to its factory default settings.
WPS button
This button launches the WPS Wizard.
Power (DC-IN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
Power button
Press this button to power on or off the stystem.
USB 3.0 / 2.0 port
Insert a USB 3.0 / 2.0 device such as a USB hard disk or USB flash drive into this port.
Insert your iPad's USB cable into this port to charge your iPad.
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
NOTES:
•
Use only the adapter that came with your package. Using other
adapters may damage the device.
Specifications:
•
DC Power adapter
Operating
Temperature
Operating Humidity
8
DC Output: +12V with max 2.5A current;
0~40
Storage
o
C
50~90%
Storage
On Off
0~70
o
C
20~90%
Advertisement
Table of Contents
