Table of Contents
Advertisement
INSTALLING ANTI-TILTING DEVICE
If the height of the counter is 820 mm or lower, you cannot install the anti-tilting device.
~10mm
PREPARATION AND ASSEMBLY OF THE CUPBOARD DOOR
The dimensions of the cupboard door should be:
•
width min. 595 - max. 598 mm;
•
thickness 16-22 mm.
12
Before proceeding with appliance building in, bring it
near the recess and preposition the inlet hose, the
drain hose and the mains cable.
WARNING! Make sure they are not
kinked or squashed.
1. Remove the screws of the top cover on the rear of
the appliance and install the anti-tilting device as
shown in the drawing.
2. Adjust the anti-tilting device so that the distance
from the counter is 10mm. Loosen the nut counter-
clockwise with a 3mm wrench. Adjust the height and
turn the nut clockwise to fix it.
Advertisement
Table of Contents
