Page 1
English CONTROLS AND INDICATORS 1) Power LED: Green light = ON Red light = OFF or Standby 2) Mains switch OFF / AUTO or ON WARNING ! To reduce the risk of electric shock, do not open or remove cover or back. Do not expose this appliance to rain or moisture. In case of malfunction consult qualified service personel.
1. UNPACKING Carefully unpack the Audio Pro subwoofer and check for any damages. If possible, keep the cartonbox if future transportation is needed. You should immediately contact your dealer if the subwoofer is damaged .
English 3. FUNCTIONS Power switch (2): To switch the subwoofer amplifier to ON, AUTO or OFF mode. Make sure that the power cord is not connected to the outlet during installation. AUTO MODE: The amplifier goes automatically into standby mode if no signal been detected in 15 - 20 minutes.
(W)...320 mm (H)...320 mm (D)...320 mm Specifications may be changed without notice, Audio Pro follows a policy of continous advancement in development Check that all connections have been made properly. Check if any of the wires or connectors are damaged or short-cirquit.