Table of Contents
Advertisement
34
www.electrolux.com
Problem
The display shows an error
code that is not in this ta‐
ble.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
There is an electrical fault.
The demo mode is activa‐
ted.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
1. Deactivate the oven.
2. Press and hold at the
same time
.
3. The first digit on the
display and Demo indi‐
cator start to blink.
4. Enter the code 2468 by
turning the knob for the
temperature right or left
to change the values
and press
to con‐
firm.
5. The next digit starts to
blink.
6. Demo mode deacti‐
vates when you con‐
firm the last digit and
the code is correct.
Advertisement
Table of Contents
