Time-Setting Options - Siemens EH611BE15E User Manual

Note: After approx. eight minutes, the appliance auto-
matically switches back to performance level ⁠ .
Changing or deactivating the intensive ventilation
setting
Touch ⁠ .
1.
Select the required performance level or set the
2.
and symbols to ⁠ .
9.6 Automatic start for the ventilation
system
If you select a power level for a cooking zone, the auto-
matic start switches on.
The ventilation system starts at the corresponding
power level. You can find out how to change this set-
ting in section
→ "Basic settings", Page 15.
10

Time-setting options

Your hob has various functions for setting the cooking
time:
¡ Setting the cooking time
¡ Automatically programming the cooking time
¡ Timer
10.1 Setting the cooking time
The cooking zone switches off automatically once the
time that is set has elapsed. You can set a cooking
time of up to 99 minutes.
Programming the cooking time
Select the cooking zone and the required power
1.
level.
Touch ⁠ .
2.
a The display for the cooking zone lights up.
pears in the timer display.
Touch or . The following basic setting appears:
3.
Touch : 30 minutes
‒
Touch : 10 minutes
‒
Use the or symbols to select the cooking time.
4.
a The time starts to elapse.
9.7 Run-on function for the ventilation
system
The run-on function leaves the ventilation system run-
ning for a few minutes after the hob has been switched
off. This allows you to remove any cooking fumes that
remain. The ventilation system then automatically
switches off.
Activating the fan run-on
As standard, the run-on time is activated with a max-
imum switch-off time.
You can find out how to change this setting in section
→ "Basic settings", Page 15.
Note: The run-on function only switches on if at least
one cooking zone has been switched on for at least
one minute.
Deactivating the fan run-on
Manually
To deactivate the function, touch ⁠ .
Automatically
The appliance deactivates the run-on function if:
¡ The run-on time has elapsed.
¡ You switch the appliance on again.
Note: If you have set a cooking time for several cook-
ing zones, the time information for each of the selected
cooking zones always appears in the timer display.
Changing or deleting the cooking time
Select the cooking zone.
1.
Touch ⁠ .
2.
To change the cooking time, touch or
3.
to ⁠ ⁠ .
Once the cooking time has elapsed
The cooking zone switches itself off. An audible signal
sounds and
10 seconds. The display lights up in the cooking
zone.
Touch ⁠ .
▶
ap-
a The displays go out and the audible signal stops.
10.2 Automatically programming the
cooking time
You can automatically set the same cooking time for all
cooking zones. The set time for each of the cooking
zones counts down independently of the others.
You can find more information about this at
→ "Basic settings", Page 15.
10.3 Short-term timer
You can use the short-term timer to set a time of up to
99 minutes. This function operates independently of the
cooking zones and other settings. This function does
not automatically switch off a cooking zone.
Setting the short-term timer
Select the short-term timer in one of two ways:
1.
Time-setting options en
appears in the timer display for
or set it
13