Positioning and connecting
en
Removing the support struts
Unscrew and remove all screws in
1.
the vertical transport struts.
Remove the transport struts.
2.
Hose and cable lengths
Connection on left side
( ~ 105 cm
0 ~ 145 cm
8 ~ 95 cm
@ 60 cm ~ 100 cm
or
16
Connection on right side
( ~ 60 cm
0 ~ 195 cm
8 ~ 140 cm
@ 60 cm ~ 100 cm
If the supply hose is too short for
Note:
your connection, you can order an
extension from the after-sales service.
Water inlet
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve* in water (it contains an electric
valve).
* Depending on the model
Observe the following when connecting
the appliance:
Notes
Only operate the appliance using
■
cold mains water.
Do not connect the appliance to the
■
mixer tap of an unpressurised hot-
water boiler.
Do not use a used supply hose. Only
■
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.