Table of Contents
Advertisement
Manually Configuring Network Settings in Windows 98 or Me
1. Right-click on "My Network Neighborhood" and select "Properties" from the
drop-down menu.
2. Select "TCP/IP -> settings" for your installed network adapter. You will see the
following window.
(1)
[98 Me IP properties.tif] [use current image] [keep]
3. If "Specify and IP address" is selected, your Router will need to be set up for
a static IP connection type. Write the address information in the table below.
You will need to enter this information into the Router.
4. Write the IP address and subnet mask from the "IP Address" tab (3).
5. Click the "Gateway" tab (2). Write the gateway address down in the chart.
6. Click the "DNS Configuration" tab (1). Write the DNS address(es) in the chart.
(2)
(3)
Advertisement
Table of Contents
