Table of Contents
Advertisement
recheck your connections if the "Wired" and "Router" lights are not a
steady blue after 20 seconds.
4. Rotate the antennas up.
5. Locate the CD in this guide and insert it into your computer. The Setup
Wizard should appear automatically. If it doesn't, open the CD in My
Computer (Windows) or the Finder (Mac OS X) and double-click the
"Router Setup" icon.
*If you are replacing an existing router, find the cable connecting the modem and
old router. Disconnect it from the old router and plug it into the yellow port on the
new router.
Step 2: Set Up the Router – Run the Setup Assistant Software
A. Shut down any programs that are running on your computer at this time.
Turn off any firewall or Internet-connection-sharing software on your computer.
B. Insert the CD into your computer. The Setup Assistant will automatically
appear on your computer's screen within 15 seconds. Click on "Go" to run the
Setup Assistant. Follow the instructions there.
IMPORTANT:
Run the Setup Assistant from the computer that is directly connected to the Router from
Step 1 – B.
[Keep existing screenshots for Step2]
<Insert: EZI_1.tif>
Advertisement
Table of Contents
