Subscribe to Our Youtube Channel
Related Manuals for Pulsar HPSB 3524C
Summary of Contents for Pulsar HPSB 3524C
- Page 1 HPSB 3524C v.1.0 HPSB 27,6V/3A/2x17Ah Buffer, switching power supply unit. Edition: 2 from 18.09.2012 Supercedes: 1’st from 21.12.2011...
- Page 2 17Ah/12V batteries. A micro switch indicates door opening (front cover). OPTIONAL POWER SUPPLY CONFIGURATIONS: (visualisation available at: www.pulsar.pl) 1.Buffer power supply unit HPSB 27,6V/8x0,3A/2x17Ah. - HPSB3524C + LB 8x0,3A (AWZ577 or AWZ580) + 2x17Ah 2.Buffer power supply unit HPSB 27,6V/3x1A/2x17Ah.
- Page 3 7.Buffer power supply unit HPSB 27,6V/2x5V÷18V/2x2A ÷1,3A/2x17Ah. - HPSB3524C + 2xDCDC20 (2x5V÷18V/2A÷1,3A) + 2x17Ah 8.Buffer power supply unit HPSB 27,6V/2x5V÷18V/2x2A ÷1,3A/8x0,5A/2x17Ah. - HPSB3524C + 2xDCDC20 (2x5V÷18V/2A÷1,3A) + 2xLB4 8x0,5A (AWZ574 or AWZ576) + 2x17Ah 1.2 Block diagram (fig.1) Fig.1. The block diagram of the PSU. 1.3 Description of PSU components and connectors ( tab.1, tab.2, fig.2).
- Page 4 Fig.2. The view of the PSU.
- Page 5 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Electrical parameters (tab. 3). Mains supply 176÷264V AC Current up to 0.9A@230VAC Power frequency 50÷60Hz Supply power 100W max. Efficiency Output voltage 27,6V DC –...
- Page 6 Operating parameters (tab.6). Operating temperature -10ºC...+40ºC (see: chart 1) Storage temperature -20ºC...+60ºC Relative humidity 20%...90%, without condensation Vibrations during operation unacceptable Impulse waves during operation unacceptable Direct insulation unacceptable Vibrations and impulse waves during transport According to PN-83/T-42106 Chart 1. Acceptable output current from the PSU depending on ambient temperature. 2.
- Page 7 The shock protection circuit shall be performed with a particular care, i.e. the yellow and green wire coat of the power cable shall stick to one side of the terminal - marked with ‘ ‘ symbol on the PSU enclosure. Operation of the PSU without the properly made and fully operational shock protection circuit is UNACCEPTABLE! It can cause a device failure or an electric shock.
- Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year warranty for the equipment, starting from the initial product date of purchase placed on the receipt. 2. If a purchase proof is missing, a three-year warranty period is counted from the device’s production date.
Need help?
Do you have a question about the HPSB 3524C and is the answer not in the manual?
Questions and answers