Download Print this page

Pulsar HPSB 1248C Manual

Buffer, switch mode power supply unit.

Advertisement

Quick Links

HPSB 1248C
v.1.0
HPSB 48V/1,2A/17Ah
Buffer, switch mode power supply unit.
EN**
Edition: 2 from 24.10.2016
Supersedes edition: 1 from 05.01.2016

Advertisement

loading
Need help?

Need help?

Do you have a question about the HPSB 1248C and is the answer not in the manual?

Questions and answers

Summary of Contents for Pulsar HPSB 1248C

  • Page 1 HPSB 1248C v.1.0 HPSB 48V/1,2A/17Ah Buffer, switch mode power supply unit. EN** Edition: 2 from 24.10.2016 Supersedes edition: 1 from 05.01.2016...
  • Page 2: Green Power

    GREEN POWER www.pulsar.pl HPSB1248C Features:   battery output full protection against short-circuit DC 48V/1,2A uninterruptible power supply and reverse polarity connection  fitting battery: 17Ah/12V  LED indication  wide range of mains supply: 176÷264V   protections: high efficiency 80% ...
  • Page 3 GREEN POWER www.pulsar.pl HPSB1248C 1.2 Block diagram Fig.1 Fig.1. The block diagram of the PSU. 1.3 Description of PSU components and connectors ( tab.1, tab.2, fig.2). Part no. Description [Fig. 2] The module of the switch mode PSU L-N power-supply connector 230V AC,...
  • Page 4 GREEN POWER www.pulsar.pl HPSB1248C Fig.2. The view of the PSU. 1.4 Technical parameters: - electrical parameters (tab.2) - mechanical parameters (tab.3) - operation safety (tab.4) - operation parameters (tab.5) Electrical parameters (tab. 2) PSU type A (EPS - External Power Source) 176÷264V AC...
  • Page 5 GREEN POWER www.pulsar.pl HPSB1248C LED indication: - red, normal status – on, failure: off - AC diode indicating AC power status - green, normal status – on, failure: off - AUX diode indicating DC 13,8V power status at the switch mode PSU output Mechanical parameters (tab.
  • Page 6 GREEN POWER www.pulsar.pl HPSB1248C 2. Installation. 2.1 Requirements. The buffer PSU shall be mounted by a qualified installer with appropriate permissions and qualifications for 230V/AC installations and low-voltage installations (required and necessary for a given country). The device shall be mounted in confined spaces, according to the environment class II, with normal air humidity (RH=90% max.
  • Page 7: Green Led

    GREEN POWER www.pulsar.pl HPSB1248C 3. Operating status indication. 3.1 LED indication of operating status. The is equipped with two diodes on the front panel: RED LED:  on – the PSU is supplied with 230V AC  off – no 230V AC supply GREEN LED: ...
  • Page 8: Weee Label

    CAUTION! The power supply unit is adapted for cooperation with the sealed lead-acid batteries (SLA). After the operation period they must not be thrown but recycled according to the applicable law. Pulsar Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 E-mail: biuro@pulsar.pl, sales@pulsar.pl http:// www.pulsar.pl, www.zasilacze.pl...

This manual is also suitable for:

Green power hpsb 1248c