ASC Rattan Pillar & Ball SF006 Instructions

SF006 Solar Rattan Pillar & Ball Instructions
By All Solar Central
www.allsolarcentral.com
Thank you from the entire ASC family for purchasing
an ASC solar product! Please read this entire booklet
before assembly.

Package contents:

1 x Ball
1 x Rattan Pillar
1 x Rubber Bung
1 x Water Pump
1 x LED Light (In Top of the Ball)
1 x Solar Panel
1 x Solar Panel Bracket
2 x Extension Tube
1 x Ground Spike
Notes: If there is any damage to the product or missing
parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus

Assembly Steps:

1. Feed the pump cable and LED Light cable through
the tube in the Rattan Pillar Reservoir and exit
from the bottom of the Fountain Body. Then, use
the provided Rubber Bung to seal the tube hole
to avoid water leaking.
2. Fill reservoir with appropriate amount of water to
fully submerse the pump.
3. Attach the pump to the Rubber Hose.
4. Place the Ball and the Pump onto the Rattan
Pillar.
1