Advertisement
Quick Links
SF017 Solar Pedestal & Ball Instructions
By All Solar Central
www.allsolarcentral.com
Thank you from the entire ASC family for purchasing
an ASC solar product! Please read this entire booklet
before assembly.
Package contents:
1 x Ball
1 x Pedestal With Rubber Bung
1 x Water Pump
1 x Solar Panel
1 x Solar Panel Bracket
1 x Extension Tube
1 x Ground Spike
Notes: If there is any damage to the product or missing
parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus
Assembly Steps:
1. Feed the pump cable and LED Light cable through
the tube in the Rattan Pillar Reservoir and exit
from the bottom of the Fountain Body. Then, use
the provided Rubber Bung to seal the tube hole
to avoid water leaking.
2. Fill reservoir with appropriate amount of water to
fully submerse the pump.
3. Attach the pump to the Rubber Hose.
4. Place the Ball and the Pump onto the Pedestal.
1
Advertisement
Related Manuals for ASC SF017
Summary of Contents for ASC SF017
- Page 1 SF017 Solar Pedestal & Ball Instructions By All Solar Central www.allsolarcentral.com Thank you from the entire ASC family for purchasing an ASC solar product! Please read this entire booklet before assembly. Package contents: 1 x Ball...
- Page 2 7. Connect the Pump to the back side of the Solar Panel. IMPORTANT!! Slightly twist the connectors when connecting to make sure the rubber seals are fully in the grooves. 5. Connect the bracket, tubes and spike together. Then attach the solar panel to the bracket. Slide the holding bracket into the inside lip of the top half of the solar panel frame.
Need help?
Do you have a question about the SF017 and is the answer not in the manual?
Questions and answers