ASC SF011 Instructions

Solar desert spring fountain

Advertisement

SF011 Solar Desert Spring Fountain Instructions
Thank you from the entire ASC family for purchasing an ASC solar
product! Please read this entire booklet before assembly.
Fountain:
1 x Spring Fountain Body
1 x Ball
1 x LED Light
Notes: If there is any damage to the fountain or missing parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus

FOUNTAIN ASSEMBLY:

By All Solar Central
www.allsolarcentral.com

Package contents:

Solar Water Pump Kit:
1 x Water Pump with 16 ft. Cable
1 x Set of Fountain Nozzles
1 x Solar Panel with Battery
1 x Solar Panel Bracket
1 x Extension Tube
1 x Ground Spike
1. Feed the pump and LED Light cable through
1
the plastic tube in reservoir and exit from the
bottom of the Fountain Body.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SF011 and is the answer not in the manual?

Questions and answers

Summary of Contents for ASC SF011

  • Page 1 SF011 Solar Desert Spring Fountain Instructions By All Solar Central www.allsolarcentral.com Thank you from the entire ASC family for purchasing an ASC solar product! Please read this entire booklet before assembly. Package contents: Fountain: Solar Water Pump Kit: 1 x Spring Fountain Body 1 x Water Pump with 16 ft.
  • Page 2 2. Fill the reservoir with water so the pump is completely submersed. Note: In order to reduce mineral deposits and bacteria build-up, it is recommend using distilled water. 3. Attach the pump to the rubber hose from the ball. 4. Place the ball with connected pump onto the reservoir of the fountain body.

Table of Contents