ASC SF023 Instructions

Solar lotus floating fountain

Advertisement

SF023 Solar Lotus Floating Fountain Instructions
Thank you from the entire ASC family for purchasing an ASC solar
product! Please read this entire booklet before assembly.

PACKAGE CONTENTS:

1 x Lotus Leaf
1 x Lotus Flower
1 x 12-Hole Daisy Jet
1 x 7-Hole Daisy Jet
1 x Fountain Head Adaptor
Notes: If there is any damage to the fountain or missing parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus
FOUNTAIN ASSEBMLY:
1. Identify a suitable area in your pond for the lotus
floating fountain. Attach the lotus fountain to the
pump. A water flow valve is included in the
package. You can use it to adjust the fountain
height in order to fit your pond size.
In order to keep the lotus fountain stationary in
the desired position of your pond a bag and wire
pack have been provided to hold the fountain in
place. Simply fill the net bag with a small amount
of gravel and then select the desired length of the
wire to the correct depth of your pond. Then tie
the wire to the filled net bag and the pump. Now
the filled net bag will act as an anchor to keep
your lotus fountain in position and stop it from
moving around.
By All Solar Central
www.allsolarcentral.com
1
1 x Water Flow Valve
1 x Pump with 16ft Cable
1 x Solar Panel
1 x Solar Panel Bracket
1 x Extension Tube
1 x Ground Spike

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SF023 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ASC SF023

  • Page 1 SF023 Solar Lotus Floating Fountain Instructions By All Solar Central www.allsolarcentral.com Thank you from the entire ASC family for purchasing an ASC solar product! Please read this entire booklet before assembly. PACKAGE CONTENTS: 1 x Lotus Leaf 1 x Water Flow Valve...
  • Page 2 2. Connect the bracket, tubes and spike together. Then attach the solar panel to the bracket. Slide the holding bracket into the inside lip of the top half of the solar panel frame. The bracket holds the weight of the solar panel. The solar panel can be adjusted for optimal sunlight by using the wingnut.
  • Page 3 6. PUMP MAINTENANCE If you find the pump starts losing power or stops working, please clean the pump filter and impeller with clean water. 7. TROUBLE SHOOTING Check to see if the solar panel and pump are connected properly • Ensure the solar panel is correctly positioned in direct sunlight and it not obstructed by •...
  • Page 4 IMPORTANT!! In order to keep your battery healthy during long storage times, please make sure the battery is recharged before storing. Notes: If there is any damage to the fountain or missing parts, please contact us at 1-626-582- 8898 or www.allsolarcentral.com/contactus Please visit www.allsolarcentral.com for more products and offers.

Table of Contents