flyfly hobby Simple easy DG-505 Manual

Scale Glider Radio control airplane Wingspan:4000mm
Basic parts
Carbon Rod 12*525mm for main wing joinner
1
Carbon Rod 10*330mm *2pcs for second wing
2
joinner
Plastic Servo tray *5pcs
3
Carbon pin 6*50mm 6pcs for stable wings
4
5 Push Rod M1.5*65 *5pcs for Flap,rudder and
004-00140 Hinges*3
6
Soft wire*2pcs for elevator
7
LL04-405B Horns 8pcs for push all the servos
8
9 Metal Pinned Hinges*4pcs for canopy
UNDER SAFETY PRECAUTIONS
This radio controlled plane is not a toy!
Always keep this instruction manual ready on hand for quick reference.
Assemble this kit only places out of children reach.
First-time builders of RC radio power model should seek the advice of experienced modellers
before beginning assembly and if they do not fully understand any parts of the construction.
Taking out liability insurance is recommended.
You are responsible for this model's assembly and safe operation.
Simple easy DG-505 Manual
Model No:FF-B042/FF-B043
10
11
12
13
14
15
16
17
18
Page 1
4
3
10
18
M4*20 Butterfly Screws for lock the wings
FF12-05 Linkage Stoppers*10/set
M3*10 Screws*4pcs for locking motor
Metal Collar*2/set
2*8mm Screws 35 pcs
Metal Clevis M1.5 *3pcs
M4*35 Screws*2/pcs for locking the stable tail
2*25mm 6pcs Pin for Wingtips
FF1-130 Optional Alum retract with servo tray*1/set
6 7
5 9
8
11 12 13
15 16
14
1
3
2
Optional Alum retract