flyfly hobby F4U Corsair Assembly Instructions Manual

flyfly hobby F4U Corsair Assembly Instructions Manual

Advertisement

Quick Links

FLYFLY HOBBY MFG
广东省东莞市虎门镇太宝路虎门寨第一工业区3栋4楼
 4 / F, block 3, humen village no 1 industrial zone , taibao road, humen town,
 dongguan city, GuangDong Province. China.
Contact: Ms Mandy    Mob: 13609687704 /13433088110   Tel:(+86)0769-85012227 /85012110
W eb Site:http://www.flyflyhobby.com   Mail:info@flyflyhobby.com  Taobao:https://flyflyhobby.taobao.com
Composite fuselage,Balsa wood wings/ 复合材料机身 + 轻木机翼
Wingspan /翼展: 1800mm
Length /机身长: 1470mm
Wing Area/翼面积 : 62sq.dm
Flying Weight/起飞重 : 8200g

Warning!

First-time fliers should seek advice on pre-flight adjustments and   assembly from
experienced fliers. Remember that flying a badly adjusted aircraft is very dangerous!
In the beginning,novice fliers should always be assisted by an experienced flier  
and should never fly alone!
This models aircraft is designed to be powerred by an  engine. Installing a over power engine,or
flying this model aggressively may lead to serious damage and accidents!
UNDER SAFETY PRECAUTIONS
This radio controlled plane is not a toy!
Always keep this instruction manual ready on hand for quick reference.
Assemble this kit only places out of children reach.
First-time builders of RC radio power model should seek the advice of experienced modellers 
before beginning assembly and if they do not fully understand any parts of the construction.
Taking out liability insurance is recommended.
You are responsible for this model's assembly and safe operation.
Glow Engine fuel Ignition
F4U Corsair /海盗
Power/动力:30-35CC Engine 引擎
Propeller/桨:19*8"
Servos 40g Standard/Torque:9.8kg: 9pcs
Battery/电池: Lipo 2S 2200mAh
Engine Starter
Page 1
Fule Pump
12V Battery
(For starter)
Battery for Rx

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F4U Corsair and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for flyfly hobby F4U Corsair

  • Page 1 FLYFLY HOBBY MFG 广东省东莞市虎门镇太宝路虎门寨第一工业区3栋4楼  4 / F, block 3, humen village no 1 industrial zone , taibao road, humen town,  dongguan city, GuangDong Province. China. Contact: Ms Mandy    Mob: 13609687704 /13433088110   Tel:(+86)0769-85012227 /85012110 W eb Site:http://www.flyflyhobby.com   Mail:info@flyflyhobby.com  Taobao:https://flyflyhobby.taobao.com F4U Corsair /海盗 Composite fuselage,Balsa wood wings/ 复合材料机身 + 轻木机翼 Wingspan /翼展: 1800mm Power/动力:30-35CC Engine 引擎 Length /机身长: 1470mm Propeller/桨:19*8" Wing Area/翼面积 : 62sq.dm Servos 40g Standard/Torque:9.8kg: 9pcs Flying Weight/起飞重 : 8200g Battery/电池: Lipo 2S 2200mAh Warning! First-time fliers should seek advice on pre-flight adjustments and   assembly from experienced fliers. Remember that flying a badly adjusted aircraft is very dangerous! In the beginning,novice fliers should always be assisted by an experienced flier   and should never fly alone! This models aircraft is designed to be powerred by an  engine. Installing a over power engine,or flying this model aggressively may lead to serious damage and accidents! UNDER SAFETY PRECAUTIONS This radio controlled plane is not a toy! Always keep this instruction manual ready on hand for quick reference. Assemble this kit only places out of children reach. First-time builders of RC radio power model should seek the advice of experienced modellers  before beginning assembly and if they do not fully understand any parts of the construction. Taking out liability insurance is recommended.
  • Page 2 Main body Option Electric scale landing gear 35 CC Engine Basic assembly 19*8 Wooden parts propeller Elevator Factory design elevator servos on the stabilizer,because too thin, so it will AB glue way of the  servos on the cover, Basic comes carbon horns,M2 hinges. AB glue Servos on the servo  AB glue hignes & Horns,  then  cover,screws lock on the stabilizer connection push rob Page 2...
  • Page 3 Rudder Basic comes with the steel horns,you need made L shape for hold the rudder  Stheel   together, and come soft wire, stop lock,adjustment steel clevis for soft wire.  horns  Landing gear Option Electric scale landing gear is no including in the kit, kit comes with  the plywood for the retract. Wings: Flaps & Aileron Flaps basic come with a soft tube for hold flap together, 6*70 hinges. Please AB glue fixed one  side tube,do not glue other side, then can be one servo working 2 flaps,see photos. Page 3...
  • Page 4 Basic had servo tray on the servo cover for  flaps and  ailerons,comes 6*70 hinges,  carbon horns,ball link+M3 push rob, you will  need AB glue of the hignes,horns then   screws lock the servo on the servo tray before   connection the push rob,see the photos. Wings join Factory assembly the pins at  the front wing and back with  2pcs M6 screws lock the  wings,and comes  Plywood+fiberglass for wings  joiner. Page 4...
  • Page 5 Adjustment Ignition Retract Receive controller control Throttle switch 1000ML fuel tank 35CC Engine Page 5...
  • Page 6 Canopy The canopy come with the 2pins at front and the canopy lock on the fuselage, see photos Adjustment Page 6...
  • Page 7 110m Copyright 2019 Flyfly hobby  Designed and Manufactured by: Flyfly hobby Mfg Web: www.flyflyhobby.com Email:info@flyflyhobby.com Page 7...

Table of Contents