Advertisement
You need to purchase the following accessories power system separately to complete the model.
FF3-309B Motor 720kv 1pcs
FF4-402 ESC 60A 1pcs
FF10-107 Alum Propeller &
sprinner 11*7 φ38mm /1set
FF9-912 MG Servo 17g 7pcs
(1). Installing The wings:
800mm*6pcs (Flyfly item no:FF14-03)
Parts:Horns(No:LL04-406A/B),Servo tray ,Push robs(No:NN17-00401),Linkage Stoppers(No:FF12-05)
After installed like this photos
Copyright 2015 Flyfly hobby
Web: www.flyflyhobby.com
FF14-03 Servo extension cable: 800mm 8pcs
FF14-06 Y# extension cable: 300mm *2pcs
Battery 5S 35C 3500-4000mAh 1pcs for electric
need to preparing:17g Servos*4pcs (Flyfly item no:FF9-911) Servos extension cables
Push Rod Fixed to
the servo horns
Put the servo in to the servo
tray, with 2 screws locked
After finished like this photo, Adjust the aileron &
Flaps,then locked the Linkage stoppers,please
remember the servo horns between the Linkage
stoppers always keep in a flat line
Page 2
Page 2
Designed and Manufactured by: Flyfly hobby Mfg.
Email:info@flyflyhobby.com
locked with 4 screws
Push rod & Lingkage
Stoppers
Advertisement
