Atag VA2113RT Operating Instructions Manual page 70

Troubleshooting
Table continued from last page
Problem
The dishes are not dry enough.
30
Possible causes
The Auto open option is not
activated.
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
3-in-1/ All-in-one detergent is
used and the setting TAB
(3-in-1/ All-in-one detergent) is
activated.
Action
Activate the Auto open option.
Fully load the dishwasher.
Top up with rinse add or
increase the rinse aid dosage.
See the sections Before washing
for the first time and Settings.
Inactivate the setting TAB
(3-in-1/ All-in-one detergent) and
top up salt and rinse aid.