Table of Contents
Advertisement
SCSI Card 2906
Introduction
With SCSI Card 2906, you can connect up to seven SCSI devices to
any IBM-compatible computer with Bus Mastering PCI expansion
slots.
This installation guide provides step-by-step instructions for
Installing the SCSI Card 2906
Preparing the SCSI devices
Connecting internal SCSI devices (for example, SCSI hard disk
drives)
Connecting external SCSI devices (for example SCSI scanners,
CD-Recordable drives, or backup tape drives)
Installing the SCSI Card 2906 software
See the SCSI Card 2906 User's Reference included in this package for
additional information on using the SCSI Card 2906.
Before You Begin
Make sure your SCSI Card 2906 package includes the following
items:
SCSI Card 2906
Standard 50-pin Internal SCSI Cable
Adaptec EZ-SCSI diskette for Windows 95/98
Adaptec EZ-SCSI diskette for Windows 3.1/DOS
SCSI Card 2906 User's Reference
SCSI Card 2906 Install Guide
Check your computer properties for an available Interrupt Request
(IRQ) setting. Follow these steps to find an available IRQ setting:
1
In Windows 95/98, click the Start button, point to Settings,
and then click Control Panel.
2
Double-click System.
3
In the System Properties window, open Device Manager.
2
Advertisement
Table of Contents
