Table of Contents
Advertisement
SCSI Card 2906
4
Select File/Run from the Program Manager menu.
5
When the Run dialog box appears, type a:\setup if you are
using the A drive, or b:\setup if you are using the B drive. Then
click OK.
6
Follow the instructions that appear on-screen.
Computers with DOS 6.x or Above
1
Turn on all external SCSI devices and then the computer.
2
Insert the Adaptec EZ-SCSI diskette for DOS and Windows 3.1
into the floppy disk drive.
3
At the DOS prompt, type a:\dosinst if you are using the A
drive, or b:\dosinst if you are using the B drive. Then press
Enter.
4
Follow the instructions that appear on-screen.
Congratulations!
You have finished installing SCSI Card 2906.
16
Advertisement
Table of Contents
