Troubleshooting - Electrolux SB315N User Manual

Hide thumbs Also See for SB315N:
Table of Contents

Advertisement

Available languages

Available languages

5.4 Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:

6. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
6.1 What to do if...
Problem
The appliance is noisy.
Audible or visual alarm is
on.
A square symbol is shown
instead of numbers on the
temperature display.
The lamp does not work.
The lamp does not work.
The compressor operates
continually.
1. Disconnect the appliance from
2. Remove all food.
3. Clean the appliance and all
4. Leave the door/doors open to
Possible cause
The appliance is not sup‐
ported properly.
The cabinet has been re‐
cently switched on or the
temperature is still too
high.
The temperature in the
appliance is too high.
Temperature sensor prob‐
lem.
The lamp is in stand-by
mode.
The lamp is defective.
Temperature is set incor‐
rectly.
Many food products were
put in at the same time.
electricity supply.
accessories.
prevent unpleasant smells.
Solution
Check if the appliance
stands stable.
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
Contact the nearest Author‐
ised Service Centre (the
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible).
Close and open the door.
Contact the nearest Author‐
ised Service Centre.
Refer to "Operation"/"Control
panel" chapter.
Wait a few hours and then
check the temperature
again.
ENGLISH
59

Advertisement

Table of Contents
loading

Table of Contents