Pinnacle International MASTER MH-515-120 User's Manual & Operating Instructions page 7

– Remove heater and all packaging materials
from the shipping carton.
Tip: Be sure to remove the handles and side
supports from the Styrofoam packaging
1. Align holes in heater leg frame with lower
inner bracket.
2. Attach lower outer bracket to lower inner
bracket using screws.
3. Align lower inner bracket with side support.
4. Attach side supports to heater using tilt
adjustment knob.
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
Assembly Instructions
Tools Needed:
– Phillips Head screw driver.
– 7 mm open end wrench.
5. Slide side supports into upper brackets, align
6. Slide upper handle brackets onto front
7. Slide rear handle into upper handle brackets,
6
Tip: Use a power screwdriver and
locking wrench for easier assembly.
holes and insert screws to tighten.
handle, align holes and insert screws to
tighten.
align holes and insert screws to tighten.
Turbo Electric Fan Heater User's Manual