Specifications - Makita DFS451RFJ Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star mark
3-1. Switch trigger
4-1. Lamp

SPECIFICATIONS

Capacities
No load speed (min
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DFS441
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DFS451
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
Explanation of general view
5-1. Reversing switch lever
6-1. Locator
7-1. Locator
8-1. Locator
9-1. Locator
9-2. Bit
Model
Drywall screw
-1
)
With short locator
With long locator
Net weight
Rated voltage
) : 70 dB (A) or less
pA
) : 71 dB (A)
pA
2
) : 2.5 m/s or less
h
2
DFS441
4 mm
0 - 4,000
281 mm
296 mm
1.4 kg
D.C. 14.4 V
ENE033-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
ENG905-1
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
ENG900-1
Designation of Machine:
Cordless Screwdriver
Model No./ Type: DFS441,DFS451
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
ENG901-1
standards or standardised documents:
EN60745
3
9-3. Magnetic bit holder
10-1. Groove
10-2. Hook
10-3. Screw
DFS451
0 - 4,000
281 mm
296 mm
D.C. 18 V
Corporation as the
4 mm
1.5 kg
ENH101-15
responsible